3 Bracket Kit Install
10
3.1 Nutsert Install
Sit the bracket assembly in desired position and mark the centre of the slotted
holes with a permanent marker. (PX3 shown).
Drill out the floor with a 10mm drill bit. Drill through both the carpet and the
steel floor.
M6 Nutserts need to be fitted to the drilled holes. This can be done with a
nutsert gun. Alternatively, the fitting kit comes with a small nutsert fitting
device. Assemble the above components as shown. Use a small amount of
lubricant between the bolt head and washer.
M6x30 HIGH
TENSILEBOLT
M6 SILVER WASHER
12mm MACHINED NUT
M6 NUTSERT
