34.Wind each impact absorber adjuster bolt
out until it is firm against the chassis rail
extensions and tighten the lock nut.
35. Assemble and install combination light
surrounds (p/n 3163015) as per instructions
no. 3786421 supplied with surround kit.
Note: Optional fog lamps can be installed
at this point as per fitting instruction no.
3783315 supplied with fog lamp kit no.
6821201.
Wire the combination lamp to the vehicles
indicator and clearance lamps.
Caution: Cable tie all cables together and
keep all cables clear of sharp edges and
moving parts.
36. Air deflector assembly:
Fit three M6 cage nuts to the upper
deflector pannel as shown on the left.
For non-4.8 litre petrol engine vehicles,
assemble the second deflector pannel using
M6x16mm bolts, washers and flange nuts
as shown on the left.
4.8 litre petrol engine vehicles only require
the upper pannel to be fitted to the vehicle.
M6x16 bolts fit through these slots when
fitting to the vehicle
30/04/08
Page 10 of 12
3786405
