Network Keyboard
15
4.
Go to the following menus: Setup
→
Remote Setup
→
Device
→
General
Select
Advanced
from the
Setup Type
drop-down list.
5.
Go to the following menus: Setup
→
Remote Setup
→
Device
→
Setup
5.1.
Click
DVR
in the device list and the
Add
button to register
the DVR on the network keyboard. You should register
DVRs to play back video recorded in the DVRs or change
the DVR settings by a network keyboard.
5.2.
Set up the registration information.
y
ID
: The network keyboard assigns the ID automatically in registration
order and you can change it. The ID will be used when controlling the
device by a network keyboard.
y
Connection
: Select
Ethernet
and enter the IP address, port number,
user ID and password for the connection to the MMX.
5.3.
Click the
OK
button.
5.4.
Click the DVR pull-down menu in the device list, then the
registered DVR’s pull-down menu. A list of monitors and
cameras connected to the DVR is displayed.
y
Main [ID]
: Indicates the ID of the main monitor connected
to the DVR.
y
Spot No. [ID]
: Indicates the Spot out number and ID of
the spot monitor connected to the DVR.
y
CAM No. [ID]:
Indicates the Video In number of the DVR
and the camera ID.
5.5.
Click a monitor or a camera in the list and click the
Edit
button.
5.6.
Set up the monitor or camera information.
y
ID
: The network keyboard assigns the ID automatically in registration
order when the DVR is registered and you can change it. The ID will be
used when controlling the monitor or camera by a network keyboard.
y
Type
: Set up the camera type.
−
Fixed
: Select if the camera is not a PTZ camera.
−
PTZ Camera
: Select if the camera is a PTZ camera and set up the
device that the PTZ camera is connected.