ARAG IBX100 4679004, Installation - Use - Maintenance

Page: 15 / 60

15
INSTALLATION
7 ISOBUS SYSTEM CABLE CONNECTION
1. Connect the ISOBUS and IN-CAB cables.
2. Turn the VT on.
3. Wait for the OP complete loading (
par.
8.1
).
IN-CAB
CONNECTION
ISOBUS
CONNECTION
Fig. 25
7.1 In-cab cable connection
Use the cable provided with the Auxiliary Input
*
package.
Connection: fit the ( in-cab connection connectors in
Fig. 25
), make sure they are properly connected and turn the ring nut clockwise until blocking.
*
ARAG Auxiliary Input control system is not compulsory on all systems, and must thus be ordered separately.
Some VTs allow controlling section valves directly from monitor touch-screen panel.
7.2 ISOBUS cable connection
Use the cable
1
(
Fig. 2
/
Fig. 3
, par.
5.1 System recommended composition
).
Connection: fix ( ISOBUS connection connectors in
Fig. 25
); make sure they are properly connected and press until locking.