ARAG Bravo 400S LT, Manual

Page: 11 / 14

11
7 ACCESSORIES
7.1 SD memory card
The SD memory card may be used to exchange data with computer Bravo 400S LT.
Before use, format the SD board in FAT 32 mode; make sure that the board is not protected and can be read by the system
(Fig. 19).
The system is ONLY compatible with SD or SDHC memory cards, up to 8 Gb of memory.
Fig. 19 Fig. 20
Fig. 21
• Insertion
Insert the memory card making sure to orient it correctly:
the card cut edge A must be face down. Push the card until it engages into place
and close the slot with the cover.
• Removal
Press and immediately release the card into the slot and slide it out.
7.2 Pendrive
The pendrive may be used to exchange data with computer Bravo 400S LT.
Before use, format the SD board in FAT 32 mode; make sure that the board is not protected and can be read by the system .
Compatible with pendrive, up to 8 Gb of memory.
ACCESSORIES