2.5
Calibration of 0 for the pressure transducer
1) Keep pressed until you
access the calibration
menu for the calibrated
returns
(see following illustration)
2) Press to access the 0
calibration menu for the
pressure transducer
(see following illustration)
ATTENTION: If the
computer has not been
programmed to manage
calibrated returns, the
display here aside will not
appear and you will go
directly to the pressure
transducer calibration
menu
(see following illustration)
3) Press until the acoustic
signal is heard confirming
that calibration of the
pressure transducer has
been completed
ATTENTION: Make sure
the pressure of the
system is zero before
starting calibration.
4) Press to return to the
main menu
English
10
