ARAG 46707001, Installation Manual, Page: 6 / 28

6
4.2 Monitor overall dimensions
222.00
130.00
58.80
40.00
Ø 6.50
Esc
F1
F3
F5
F7
F2
F4
F6
F8
Fig. 3
4.3 Monitor installation
Alfa 310S monitor shall be positioned in the farming machine cabin. Consider the following
warnings:
- Do NOT install the monitor in areas where it would be subjected to excessive vibra -
tions or shocks, to prevent any damage or accidental use of the control keys;
- Fasten the device in a visible area within driver hands' reach: consider that the
monitor shall not hinder movements or the driver's visibility.
Consider all the various connection required for operating the monitor, cable length, and suitable
room for connectors and cables. Please refer to par. 4.1 for any further information on system
configuration.
Install the monitor as follows:
- Fasten the relevant bracket where required (the previous picture shows the bracket drilling sizes). Slide
bracket out of its housing on the computer (
A
, Fig. 4) and fasten it using the supplied screws (
B
).
- Make sure bracket is safely installed, then assemble monitor on bracket and press until fully in
place (
C
).
A
B
C
F2
F4
F6
F8
F1
F3
F5
F7
F2
F4
F6
F8
F1
F3
F5
F7
Fig. 4