VP5000-DC/DC60, VP5000-DC/DC200-HL
Product description
Last edited 2019-02-08
by Sonja Scheunert
Filename
VP5000_DCDC60_200-HL_installation_manual_v1-4en.docx
76 / 173
3.13.6
Mating connector for [ST4]
[ST4] optional for VECTOPOWER VP5000-DC/DC60.
For a specific offer for your application, please contact our sales department.
ARADEX order no.: / figure
Description
VP_040145
Figure 58: Mating connector for [ST4]; source:
Intercontec
Material for mating connector [ST4],
consisting of:
•
Connector housing
•
Insulating body
•
4 female pins (crimp contacts
→
crimping
pliers required)
•
4 female pins (crimp contacts)
Table 37: Specification of the mating connector for [ST4]
For the specifications of the supplied crimp contacts, see Chapter 3.14.5 Product description,
Accessories that the customer must provide, Cable for [ST1].
Crimping pliers are required to crimp the contacts (series 923, Intercontec) for the mating
connectors. The crimping pliers are not included in the scope of delivery of the mating connector.
Intercontec manufacturer’s designation
Intercontec order number
Intercontec, crimping pliers, medium, with the
corresponding crimp insert for
∅
2 mm
contacts
Crimping pliers, medium, order number
C0.201.00
Crimp insert, order number C0.009.00
Table 38: Specification of the crimping pliers for [ST4]
3.13.7
Cooling water connection
The size of the cooling water connection is G ¾".
For a specific offer for your application, please contact our sales department.
