Wet Stove Installation Guide
1
Warnings
It is a legal requirement that the installation of all new or replacement,
wood or solid fuel heating appliances obtain Building Control approval from
your local authority. This can be done by using a qualified heating engineer,
affiliated to a government approved competent persons scheme such as
operated by HETAS.
If in doubt, contact HETAS Limited, telephone: 0845 634 5626 or visit
www.hetas.co.uk. You can also consult your local buildings inspector /
controller.
All local regulations, including those referring to National and European
standards, need to be complied with when installing the appliance.
This stove should not be installed into a chimney that serves any other
heating appliance.
Any manufacturer’s instructions must not be taken as overriding
statutory requirements.
Arada Ltd will not be responsible for any consequential or incidental loss
or injury however caused.
Any further warnings in this document will be marked out
in a box such as this one. Ignoring the warnings could lead
to damage/injury to persons and/or property.
2
Health and Safety
Before any installation work is undertaken consideration must be given
to the Health and Safety at Work Act 1974. Safe working practices should
be followed at all times.
Please consult health and safety guidelines for advice on handling heavy
and/or large items.
BK555 Rev09
1
