Wet Stove Installation Guide
Figure 2: Fitting the flue pipe inside the spigot collar.
5.5
Fire Bed Surrounds
Cast fire bed surrounds are supplied with the boiler stove and should
be fitted into the retaining holes in the rear grate bar support.
5.6
Flue Exhaust Diversion System (FEDS)
Please note that the following is not applicable to the EB25HE which features
an alternative system.
The inner section of the FEDS is welded in place during manufacture.
The outer FEDS is fitted at the factory but may become dislodged during
transit. The rear end of the outer FEDS sits on retaining lugs as illustrated
below. If you need to remove the FEDS hold the bottom of it with both
hands, palms on the bottom sloping face. Push up firmly to release the
FEDS from the retaining lugs. It may require a swift knock upwards with
the palm of your hand to release it.
BK555 Rev09
9
