BK 680 Specific
Page 11
ECOBOILER Cassette Installation Guide
5 Installing the Stove
To make the stove easier to manoeuvre (thus safer) we recommend you
remove the following parts which can then be refitted when the stove is in its
final position:
Door (To help prevent the glass from breaking)
Fuel Retainer
Throat Plate
Grate Bars
Operating Tool
Ash pan
5.1 Removing the door.
Open the door so that it’s perpendicular to the stove body and then carefully lift
the stove door upwards of its hinges. To replace the door reverse the
instructions above.
5.2 Removing the fuel retainer
The fuel retainer can simply be removed by lifting the piece upwards and
withdrawing the location lugs from the location slots within the front brace.
The piece can be rotated through the door aperture. Reverse procedure for re-
fitting.
5.3 Removing the throat plate
The throat plate rests on a structural brace welded to the rear face of the
appliance. Within the brace there are two location slots, these align with the
two lugs protruding from the throat plate.
Lift the throat plate and with the location lugs clear from the brace, rotate the
throat plate and withdraw from the appliance. Reverse procedure for refitting.
5.4 Assembling the grate bars
In your stove the grate system comprises of a series of cast iron grate bars,
seated on a pair of combs. All bars in the grate are identical.
The bars should be seated with every other bar rotated 180 degrees, so the
ends marked ’H’ and ’L’ alternate on each comb. When assembling the grate,