Arada LOG Series Fittings Manual Download Page 4

Page: 4 / 4

CAUTION : Only

Hand Tighten

Fixings

Page 4

BK 748 Specific

Arada Ltd,

The Fireworks, Weycroft Avenue,

Axminster, Devon,

United Kingdom,

EX13 5HU

Technical Help : +44 (0)1297 632052

STEP 4:

Position either the log store or stand assembly, against the appliance base. Affix the 4 off

fixing screw, that were removed in step 3. Only hand tighten these fixings, otherwise

damage to the threads may occur.

OPTIONAL STAND & LOG STORE

FITTING INSTRUCTIONS

STEP 5:

Taking care, return the appliance to the upright position. Extra caution will be needed as

the centre of gravity will have moved by fitting the new accessory.

CAUTION :

TAKE CARE

WHEN

LIFTING

UPRIGHT

Summary of Contents for LOG Series

Page 1: ...Optional Accessory Instructions OPTIONAL STAND LOG STORE FITTING GUIDE EN13240 2011 A2 2004 BK 748Rev 01 ISSUE DATE 14 09 2020...

Page 2: ...sed STEP 1 To remove the factory fitted feet assembly it is suggested that the canopy assembly be removed to avoid damage Carefully lower the stove onto its rear taking care not to damage the rear air...

Page 3: ...s secure before progressing onto step 3 STEP 3 Proceed to remove the 4 off fixings 2 no are located in either front corners and the remaining screws are located either side at the rear of the stove Re...

Page 4: ...assembly against the appliance base Affix the 4 off fixing screw that were removed in step 3 Only hand tighten these fixings otherwise damage to the threads may occur OPTIONAL STAND LOG STORE FITTING...