Arada LOG Series Fittings Manual Download Page 3

Page: 3 / 4

Page 3

BK 748 Specific

STEP 2:

With the stove safely resting on its back, place a wooden bock or similar suitable object to

prevent the appliance from rocking or moving, this can be seen in the image below.

Ensure the appliance is secure before progressing onto step 3.

STEP 3:

Proceed to remove the 4 off fixings; 2 no. are located in either front corners and the

remaining screws are located either side, at the rear of the stove. Remove the factory fitted

feet assembly. Keep this item safe, for future use.

Wooden

Packing Block

OPTIONAL STAND & LOG STORE

FITTING INSTRUCTIONS

View On Base

View On Side

2 no. Front

Corner Fixings

Side Fixing

(Repeat For

Other Side)

Summary of Contents for LOG Series

Page 1: ...Optional Accessory Instructions OPTIONAL STAND LOG STORE FITTING GUIDE EN13240 2011 A2 2004 BK 748Rev 01 ISSUE DATE 14 09 2020...

Page 2: ...sed STEP 1 To remove the factory fitted feet assembly it is suggested that the canopy assembly be removed to avoid damage Carefully lower the stove onto its rear taking care not to damage the rear air...

Page 3: ...s secure before progressing onto step 3 STEP 3 Proceed to remove the 4 off fixings 2 no are located in either front corners and the remaining screws are located either side at the rear of the stove Re...

Page 4: ...assembly against the appliance base Affix the 4 off fixing screw that were removed in step 3 Only hand tighten these fixings otherwise damage to the threads may occur OPTIONAL STAND LOG STORE FITTING...