background image

22

Galaxy 3 Operating Manual

8.2 USB Backups

The Galaxy 3 Has the ability to back up league 
stats to a flash drive. This feature was designed 
as a way to ensure you get league stats even if 
something happens to the hard drive.

You will need an empty thumb drive. There is no size
limit for these thumb drives. The files that are being 
backed up are relatively small.

Note: Do not use this as your normal method of 
communication with the boards.

Warning:This is not the method you use to collect 
stats manually from the Galaxy 3. See the 
LeagueLeader manual for that information. 

1.

Enter 

Setup Menu.

2.

Select 

Machine Setup.

3.

Select 

More Machine Setup.

4.

Take a blank thunb drive and plug it into the first
USB port right under the ethernet port. This 
should be the only one not in use and should be
easy to find. 

5.

Select 

Setup USB Backups. 

You will get a 

message asking you if you want to format 
the thumb drive. 

6.

Press the Red button to enable the USB Backup.

Thats basically it. You can leave the Backup Drive 
attached to the Galaxy 3 and it will continue to make
back ups. 

Loading the USB Backups into LeagueLeader

Now that we have a USB back up, you need to know
how to load the data it’s saved into lLeagueLeader. 

1.  On the Galaxy 3, enter 

Setup Menu.

2.

Select 

Machine Setup.

3.

Select 

More Machine Setup.

4.

Select 

Stop USB Backups.

5.

Remove the USB thumb drive.

6.

At your computer, open LeagueComm.

7.

Insert the USB backup drive into one of your 
computers open USB slots.

8.

Click on 

Upload Stats From Drive.

9.

Click on

Load Stats Into Leagues.

8.3 Adjusting the Target Camera

The player camera comes pre-adjusted but you will
need to adjust the target camera. 

1.

Power on the Galaxy 3.

2.   Go into Casual Play. You will need to use the 

video feed on the screen to help adjust the 
camera.

5.

Using the video feed, adjust the camera so that 
it is facing the target. 

Note:Clockwise rotation of the camera mounting block
rotates the image on the screen clockwise.
Counterclockwise rotation of the camera mounting block
rotates the image on the screen counterclockwise. 

6.

Once finished, insert the camera hole bezel in 
the game. It fits easier if the long side faces 
down and toward the target.

Camera Hole Bezel

3.

Looking through the target camera opening, 
locate the adjustment hole in the camera. It is 
located just below the lens.

4.

Insert the 3/32” allen wrench into the cameras    
adjustment hole.

Summary of Contents for galaxy 3





































Reviews: