Installation Guide
For Short & Tall Crops
7
Tips on how to place your Mark in the field.
Decision Agriculture
If the lights are still red:
If after a couple of tries this does not seem to work,
use a paper clip to push the reset button, located
underneath the rubber flap on the bottom of the
device. Lift the rubber flap and you will find a small
circle on the upper righthand corner. Use the paper
clip to push the button for 3-5 seconds. Then wait
one minute and try again by reconnecting the device
to its mount.
If you redeploy and the light to the right of the
Arable ‘A’ logo is still red, the Mark has failed to reach
a server. You may want to try deploying in an area
with better cellular service.
If any other lights are red, there may be a problem
with your device. Please write down which light
turned red and contact
.
If all lights have turned blue:
The deployment sequence is now complete.
Hot Tip:
If you missed the lights, simply press the button on
the top of the unit. If there were any errors during
deployment, one of the lights will turn red.
