AR SMOOTH FLITE 16 RRS, User Manual, Page: 33 / 61

33
Smooth Flite Setup Wizard
After tapping “ NEXT ” from the Model Weight Page
you will see the Master Channel Assignment
instruction page.
Smooth Flite uses a MASTER control channel on
your transmitter to turn SMOOTH FLITE On/Off
and to select low and high speed gain settings.
You need to assign a 3 stage switch on the
transmitter for this function along with a
transmitter output channel. Take the time to read
this page and press
“ NEXT ”.
Master Channel
When you are ready toggle the Master Switch on the
transmitter. The Master Switch search function will
find the assigned channel from the transmitter.
Once the channel has been found press “ NEXT ”.
The Wizard will log your selection and take you to
the Trim Help page. If you are unsure you can also
tap the
“ HELP ” button for a brief explanation.
Trim Help page
The centre trim and maximum end points are used
to tell Smooth Flite maximum servo deflection limits
It is important that we set these correctly for a good
flying experience. Please take the time to read this
help page. When you are ready press
“ NEXT ” to go
to the trim page.
Trim
The Trim page captures the minimum, maximum
and centre positions for servo travel limits. This will
be the maximum and minimum travel that the gyro
will apply for corrections. On this page you move the
sticks to their minimum and maximum positions.
Then let the sticks rest at the centre positions and
press the
“ Capture ” button. Smooth Flite will store
the positions and show the “ NEXT ” button . Press the
“ NEXT ” button to move to the SMOOTH FLITE sur-
face assignment page.