AR SMOOTH FLITE 16 RRS, User Manual, Page: 21 / 61

21
The Smooth Flite system is designed to allow you to easily
trim up to 16 servo outputs for precise servo matching in multi
ganged servo installations, Elevators, flaps and multi motor
installations. If servos require matching we recommend for
simplicity you do this in the Smooth Flite system. And here is
an example of why
Example: Gyro assisted Rudder and ground steering using
only 1 transmitter channel.
You assign the transmitter rudder channel to 2 Smooth Flite
output channels. Smooth Flite output 1 controls Rudder while
output 2 controls Steering. You can reverse/reduce the throw
of the rudder and steering channel for better ground steering
and the rudder gyro function becomes available to steering
for direction assisted take off steering. Nice.
OK, there are two methods to access the servo sub trim and
matching function in the Smooth Flite 16.
The following example assumes channel 1 from your
transmitter has been assigned to S01 on the Smooth Flite as
per factory setup.
From the Main Menu, tap on the SERVO ADJUST button. This
will take you directly to the servo match and sub - trim screen
(pictures to the right).
Lets have a look at how to sub - trim and reverse channel S01
on the Smooth Flite.
Simply tap on the servo output S01. You should now see the
Sub Trim menu for S01. The words
“ Editing S01 ” will be shown
at the top right of the screen (picture to the right) . This can be
used to check you have selected the correct channel.
Lets now reverse the servo. Tap the SERVO DIRECTION
button. This will change the direction of rotation on the servo.
Tapping the
SERVO DIRECTION button a second time will set
it to its original direction.
Now lets have a look at sub - trimming a servo. Tap the “ Sub
Trim & Servo Match ” button to take you into the Sub Trim
Page. Press the Sub Trim +/ - buttons to Sub Trim the servo.
This is the same as sub trimming on your transmitter but
offers higher resolution and precise servo matching. You can
also adjust end points of the servo from this page using
Servo
Travel . The combination of sub trim and Servo Travel will give
you precise multi - ganged servo matching or precise matching
of elevators, flaps and multi engine models.
TAP RETURN TO COMMIT YOUR TRIM CHANGES TO MEMORY
Servo Sub - Trim: Reversing Method 1