7
Using the Aux In input
Use the audio cable included with this speaker to
connect the audio output from your device to the
Aux In
audio input on the speaker’s back panel (you
might need to open the rubber flap protecting the
jack). The speaker automatically switches to the
Aux
In
audio.
If you’re using a single speaker, the button turns
white you’re using the
Aux In
input. If you’re using
two, the button turns blue, and the stereo link with
the other speaker is turned off while you’re using
the
Aux In
input.
To listen to Bluetooth audio again, unplug the cable
from the speaker’s
Aux In
jack.
IMPORTANT:
The
Aux In
input plays your music on
one speaker only. For two-
speaker stereo, you must use
Bluetooth with two speakers
linked for stereo playback.
Speaker back
Using Multi-Mode Lighting
The
Lighting Mode
and
Color
buttons give you
control over this speaker’s built-in multi-mode
lighting. You can use the lighting whether the
speaker’s on or off.
When the speaker’s off...
Press the
Mode
button to turn white light on or off.
When the speaker’s on...
Press the
Mode
button to cycle through the multiple
lighting modes:
Solid on
gives you a solid light of your color
choice—just press the
Color
button to see the
options.
Breathe mode
slowly fades up and down light in
your color choice (press
Color
to see the options).
Dance mode
and
Party mode
make the lights
follow the beat of your music and cycle through
the colors.
Press the
Color
button to cycle through the 8
available colors for Solid on and Breathe modes.
Speaker top
Multi-Mode Lighting Demo
This speaker has a lighting
demo mode that shows off all
of the lighting options.
To activate/deactivate the
lighting demo:
Make sure
the speaker’s on. Then press
and hold
Mode
and
Color
at
the same time for 10 seconds
(until the demo light show
starts or stops).
