AR 100S1G6AB, Operating And Service Manual

Page: 27 / 52

Model 100S1G6AB
Rev A 11
2.4.6.1 Power On/Off
This command controls the power on/off state of the amplifier.
Syntax: POWER:x
Parameters: State(x):
OFF = power off
ON = power on
Response Format: None (No query for this command)
Example: To turn the power on, send the following command:
POWER:ON<LF>
To turn the power off, send the following command:
POWER:OFF<LF>
2.4.6.2 RF On/Off
This command controls the RF on/off state of the amplifier.
Syntax: RF:x
Parameters: State(x):
OFF = power off
ON = power on
Response Format: None (No query for this command)
Example: To turn the RF on, send the following command:
RF:ON<LF>
To turn the RF off, send the following command:
RF:OFF<LF>
2.4.6.3 Reset Faults
This will clear all faults, if possible.
Syntax: RESET
Parameters: None
Response Format: None (No query for this command)
Example: To clear any faults, send the following command:
RESET<LF>