AR 10046494, Operating And Service Manual, Page: 21 / 60

This model is designed to have low spurious
signals, exhibit very good linearity, and is ex-
tremely load tolerant which enables it to be used
in many RF applications such as: RF susceptibility
testing, antenna/component testing, and com-
munication technology testing. It can be used as
a test instrument covering multiple frequency
bands and are suitable for a variety of commu-
nication technologies such as CDMA, W-CDMA,
TDMA, GSM, UWB, WiMAX etc.
The export classification for this equipment is
3A001. These commodities, technology or soft-
ware are controlled for export in accordance
with the U.S. Export Administration Regulations.
Diversion contrary to U.S. law is prohibited.
The Model 60/40S1G18B is a portable, self-
contained, air-cooled, dual-band, broadband,
completely solid-state amplifier designed for
applications where instantaneous bandwidth,
high gain and linearity are required.
This model is equipped with a Digital Control
Panel (DCP) which provides both local and re-
mote control of the amplifier. The digital display
on the front panel indicates control status and
reports of internal amplifier status. All amplifier
control functions and status indications are avail-
able remotely in GPIB/IEEE-488 format, RS-232
hardwire and fiber optic, USB, and Ethernet.
Features
Specifications
60/40S1G18B

60/40 Watts CW

0.7GHz–18GHz
AR RF/Microwave
Instrumentation
160 School House Rd
Souderton, PA 18964
215-723-8181
For an applications engi-
neer call:800.933.8181
www.arworld.us
Model Configurations
Specifications, General
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum,
0 dBm
INPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 maximum
OUTPUT IMPEDANCE: 50 ohms, nominal
MISMATCH TOLERANCE: 100% of rated power with-
out foldback. Will operate without damage or oscilla-
tion with any magnitude and phase of source and load
impedance. See Application Note #27.
MODULATION CAPABILITY: Will faithfully reproduce
AM, FM, or pulse modulation appearing on the input
signal.
SPURIOUS: Minus 73 dBc typical
CONNECTORS:
See Model Configurations; RF In/Out are on the
same panel
REMOTE INTERFACES:
IEEE-488: 24 pin female
RS-232: 9 pin subminiature D (female)
RS-232 (Fiber-optic): Type ST
USB 2.0: Type B
Ethernet: RJ-45
SAFETY INTERLOCK: 15 pin subminiature D
COOLING: Forced air (internal self-contained liquid)
SIZE (W x H x D)
w/cabinet: 50.3 x 34 x 62.2 cm; 19.8 x 13.4 x 24.5 in
w/o cabinet: 48.3 x 31.2 x 62.2 cm; 19.0 x 12.3 x
24.5 in
WEIGHT:
w/cabinet: 52.2 kg; 115 lbs
w/o cabinet: 40.1 kg; 90 lbs
EXPORT CLASSIFICATION: 3A001