AR 1000TP8G18 Series, Operating And Service Manual

Page: 23 / 74

E Must select one enclosure type from the following
[E1 or E2 or E2S]:
E1 removable outer enclosure, size 19.8 x 10 x 27
in., 50.3 x 25.4 x 69 cm.
E2 without outer enclosure, size 19 x 8.75 x 27 in,
48.3 x 22.2 x 69 cm.
E2S without outer enclosure; slides and front handles
installed for rack mounting.
S
May select a special feature (extra cost) from the
following [{(S1R or S1F) and/or S2K} or S3P]
S1R Reflected sample port on rear panel, type N fe-
male connector. Forward and reflected sample
port calibration data supplied on disk in Excel
format at 51 points, evenly spaced over the speci-
fied frequency range.
S1F Reflected sample port on front panel, type N
female connector. Input and forward sample port
on front panel. Forward and reflected sample
port calibration data supplied on disk in Excel
format at 51 points, evenly spaced over the speci-
fied frequency range.
S2K Supplied with two TF type externally mountable
harmonic filters and a switch kit that allows user
to select an appropriate filter band, high or low,
via this TWTA. Insertion loss when used with
filters is maximum 1.5 dB. See TF type Filter
specification table below. Dimensions and enclo-
sures are for TWTA’s only without kits and filters.
S3P RF output waveguide changed to WRD650. Fre-
quency range extended down to 6.5 GHz.
6.5–7.5 GHz, 1000 watts pulse
Flatness: equalized for ±5 dB maximum from 6.5
–18 GHz at rated power. Reflected sample port
on rear panel, type N female connector.
S4R Remote Interface: Change remote interface to
Ethernet from standard IEEE-488 GPIB.
S5C 5m power cable, supply end unterminated, am-
plifier end fitted with MS3106F18-115 connector
and appropriate mating connector on rear of
amplifier as power inlet.
S6D Duty Cycle=6%.
Page 3
1000TP8G18

Pulse Amplifier

M1–M22

1000 Watts

7.5GHz–18GHz
Model Configurations
To order AR Products, call 215.723.8181. For an applications engineer call:800.933.8181. Direct to Service call: 215.723.0275 or
email: service@arworld.us For Faxing Orders:866.859.0582 (Orders Only Please) info@arworld.us
Approved for public release by AR RF/Microwave Instrumentation 102419
Model
Number
Weight Features
E S
1000TP8G18 52 kg (115 lbs) E1 -
M1 39 kg (85 lbs) E2
M2 41 kg (90 lbs) E2S -
M3 52 kg (115 lbs) E1 S1R
M4 39 kg (85 lbs) E2 S1R
M5 41 kg (90 lbs) E2S S1R
M6 52 kg (115 lbs) E1 S1F
M7 39 kg (85 lbs) E2 S1F
M8 41 kg (90 lbs) E2S S1F
M9 62 kg (135 lbs) E1 S2K
M10 48 kg (105 lbs) E2 S2K
M11 50 kg (110 lbs) E2S S2K
M12 62 kg (135 lbs) E1 S2K, S1R
M13 48 kg (105 lbs) E2 S2K, S1R
M14 50 kg (110 lbs) E2S S2K, S1R
M15 62 kg (135 lbs) E1 S2K, S1F
M16 48 kg (105 lbs) E2 S2K, S1F
M17 50 kg (110 lbs) E2S S2K, S1F
M18 52 kg (115 lbs) E1 S3P
M19 39 kg (85 lbs) E2 S3P
M20 41 kg (90 lbs) E2S S3P
M22 41 kg (90 lbs) E2S
S4R, S5C,
S6D
M21 39 kg (85 lbs) E2 S3P, S4R
S2K – TF TYPE FILTER SPECIFICATIONS
Micro-
wave
Filter
Model
For Use
with AR
TWTA
Model
Pass
Band
(GHz)
Inser-
tion
Loss
(dB
max)
Reject
Band
(GHz)
Rejec-
tion
(dB
min)
Power
(fundamental
& harmonic,
watts, max)
Input
connect-
or
Output
connect-
or
Size
L x W x D
(cm, in max)
Weight
(kg, lbs
typical)
Input
VSWR in
Pass
band
(typical)
Input
VSWR in
Reject
band
(typical)
filter 1
1000TP8G18
with
WRD750D24
waveguide
flange,
requires two
filters
7.5-
12.4
0.5 15-36 25 150 & 100
average,
3000 & 2000
peak
WRD750
D24
wave-
guide
flange
30 x 18 x 15
12 x 3 x 6
4.5, 10 1.3:1 2.5:1
filter 2 12.4-
18
0.5 24.8-36 25 150 & 100
average,
3000 & 2000
peak
30 x 18 x 15
12 x 3 x 6
4.5, 10 1.3:1 2.5:1
WRD750
D24
wave-
guide
flange