AR 1000T2G8B, Operating And Service Manual

Page: 33 / 72

Model 1000T2G8B
Rev - 19
Command Function Units Response format
RDTMPTWTHPA1C Returns TWT temp (°C), HPA1 °C TWTHPA1C=[ ]C
RDTMPTWTHPA2C Returns TWT temp (°C), HPA2 °C TWTHPA2C=[ ]C
RDTMPPSHPA1F Returns power supply temp (°F), HPA1 °F PSHPA1F=[ ]F
RDTMPPSHPA2F Returns power supply temp (°F), HPA2 °F PSHPA2F=[ ]F
RDTMPPSHPA1C Returns power supply temp (°C), HPA1 °C PSHPA1C=[ ]C
RDTMPPSHPA2C Returns power supply temp (°C), HPA2 °C PSHPA2C=[ ]C
RDTWTOTF Returns TWT overtemp warning setpoint (°F) °F TWTOTF=[ ]F
STWTOTF Sets TWT overtemp warning setpoint (°F) °F
RDTWTOTC Returns TWT overtemp warning setpoint (°C) °C TWTOTC=[ ]C
STWTOTC Sets TWT overtemp warning setpoint (°C) °C
RDPSOTF Returns power supply overtemp warning setpoint (°F) °F PSOTF=[ ]F
SPSOTF Sets p. s. overtemp warning setpoint (°F) °F
RDPSOTC Returns p. s. overtemp warning setpoint (°C) °C PSOTC=[ ]C
SPSOTC Sets p. s. overtemp warning setpoint (°C) °C
RDIWOC Returns helix overcurrent warning setpoint mA IwOC=[ ]
SIWOC Sets helix overcurrent warning setpoint mA
RDLOGIC Returns logic state code (see Table 3-6) Sys=[ ]
RDA Returns gain % A=[ ]
SA Sets gain %
RDHTDREM Returns remaining heater time delay sec. HTD=[ ]s
RDPOD Returns forward power out (dBm) dBm Po=[ ]dBm
RDPOW Returns forward power out (W) watts Po=[ ]W
RDPRD Returns reverse power out (dBm) dBm Pr=[ ]dBm
RDPRW Returns reverse power out (W) watts Pr=[ ]W
RDPOHID Returns over forward power warning setpoint (dBm) dBm Pohi=[ ]dBm
SPOHID Sets over forward power warning setpoint (dBm) dBm
RDPOLOD Returns under forward power warning setpoint (dBm) dBm Polo=[ ]dBm
SPOLOD Sets under forward power warning setpoint (dBm) dBm
RDPOHIW Returns over forward power warning setpoint (W) watts Pohi=[ ]W
SPOHIW Sets over forward power warning setpoint (W) watts
RDPOLOW Returns under forward power warning setpoint (W) watts Polo=[ ]W
SPOLOW Sets under forward power warning setpoint (W) watts
RDPRHID Returns over reverse power warning setpoint (dB) dBm Prhi=[ ]dBm
SPPRHID Sets over reverse power warning setpoint (dBm) dBm
RDPRHIW Returns over reverse power warning setpoint (W) watts Prhi=[ ]W
SPRHIW Sets over reverse power warning setpoint (W) watts
RDHTRAUTOOFF Returns heater to auto off delay hours
SHTRAUTOOFF Sets heater auto off delay (see Table 3-9)
*IDN?; Returns the product model number [ ]
*STA?; Returns status string (see Table 3-7) [ ]
*STB?; Returns status string (see Table 3-8) [ ]