AR 10006896, Operating And Service Manual

Page: 34 / 68

Model 500T2G8
22 Rev E
Command Function Units Response format
SPSOTC Sets p. s. overtemp warning setpoint (°C) °C
RDIWOC Returns helix overcurrent warning setpoint mA IwOC=[ ]
SIWOC Sets helix overcurrent warning setpoint mA
RDLOGIC Returns logic state code (see Table 3-6) Sys=[ ]
RDA Returns gain %
A=[ ]
SA Sets gain %
RDHTDREM Returns remaining heater time delay sec. HTD=[ ]s
RDPOD Returns forward power out (dBm) dBm Po=[ ]dBm
RDPOW Returns forward power out (W) watts Po=[ ]W
RDPRD Returns reflected power out (dBm) dBm Pr=[ ]dBm
RDPRW Returns reflected power out (W) watts Pr=[ ]W
RDPOHID Returns over forward power warning setpoint (dBm) dBm Pohi=[ ]dBm
SPOHID Sets over forward power warning setpoint (dBm) dBm
RDPOLOD Returns under forward power warning setpoint (dBm) dBm Polo=[ ]dBm
SPOLOD Sets under forward power warning setpoint (dBm) dBm
RDPOHIW Returns over forward power warning setpoint (W) watts Pohi=[ ]W
SPOHIW Sets over forward power warning setpoint (W) watts
RDPOLOW Returns under forward power warning setpoint (W) watts Polo=[ ]W
SPOLOW Sets under forward power warning setpoint (W) watts
RDPRHID Returns over reflected power warning setpoint (dB) dBm Prhi=[ ]dBm
SPPRHID Sets over reflected power warning setpoint (dBm) dBm
RDPRHIW Returns over reflected power warning setpoint (W) watts Prhi=[ ]W
SPRHIW Sets over reflected power warning setpoint (W) watts
SYSTEM:ON; Emulates pressing the System ON button from System OFF
(Exit Sleep Mode)
SYSTEM:OFF; Emulates pressing the Power Save button. (Enter Sleep Mode)
RDHTRAUTOOFF Returns heater auto off delay hours
SHTRAUTOOFF Sets heater auto off delay (see Table 3-9)
*IDN?; Returns the product model number [ ]
*STA?; Returns status string (see Table 3-7) [ ]
*STB?; Returns status string (see Table 3-8) [ ]