7
OFF/O
ON/I
3
C
D
Slide cord hook holster (D) onto right side, when facing
the unit, of power washer unit (C) as shown.
Note:
This step does not require any screws.
4
C
E
Soft PVC High Pressure Hose Assembly
Screw Soft PVC high pressure hose (E) clockwise onto
bottom front of power washer unit (C). Pull back collar
and insert o-ring post into water outlet far enough so
collar can thread onto outlet threads until hand tight.
If it takes fewer than six turns you have not properly
tightened the Soft PVC high pressure hose fitting. It is
easier to position the power washer in front of you to
ensure that the threads are started correctly. Failure
to properly tighten high pressure hose will result in the
hose slipping or popping off immediately upon turning
unit on. Do not worry about damage if this occurs–just
reinstall and take extra care when screwing on the Soft
PVC high pressure hose fitting.
Note: DO NOT
use pliers or locking pliers to tighten.
5
E
F
Connect the other end of Soft PVC high pressure hose
(E) to spray gun (F) by inserting the silver metal tip of
high pressure hose into the fitting just ahead of trigger
guard. It will lock into spray gun with a “click”. Confirm
hose is locked into spray gun by slightly pulling on
hose. The hose is now securely attached to spray gun.
Note: DO NOT
press button on underside of gun when
connecting hose to gun.
2
1
6
E
F
To release hose (E) from spray gun (F), press button on
underside of gun toward trigger guard. The hose will
slide out from connection.
92744_15ANR010 AR142S_1500PSI ENG-FR-SP.indd 7
16/12/17 下午12:36
