5
SAFETY INFORMATION
SAFETY INFORMATION
5
Double Insolated Product
SAFETY INFORMATION
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
detergent. Dish or laundry soap is too thick and will
clog the nozzle of your detergent bottle.
IMPORTANT:
Store the power washer indoors to prevent
the water in the unit from expanding under freezing
conditions. When the water freezes and expands, your
power washer will be damaged and become inoperable.
Or, if storing outdoors, it is recommended you use pump
saver (not included) to protect pumps.
26.
NEVER
use hot water with your power washer. It will
overheat and damage the high pressure pump.
27.
NEVER
leave the power washer unattended while it
is powered “ON”.
28.
ALWAYS
turn the water supply “ON ” before turning
the power washer power to “ON”. Running the pump
dry will cause damage to the internal components.
29.
NEVER
use a water supply to your power washer
that exceeds 150 PSI maximum.
30.
NEVER
disconnect the high pressure hose from the
power washer while the system is pressurized.
31.
NEVER
permanently engage the trigger mechanisms
on the spray gun.
32.
NEVER
operate the power washer unless all
components are properly and securely connected.
33.
NEVER
allow the power washer pump to run for
more than one minute after you have turned off the
water supply. This can cause the motor and pump to
overheat and fail.
34.
NEVER
use lances or other parts that are not
compatible for this specific AR Blue Clean unit.
35.
NEVER
use an extension power cord since it defeats
the effectiveness of the GFCI and increases the
chance of electrocuting the operator.
36.
NEVER
spray any electrical outlet with your power
washer.
37. Inspect the power cord before using.
DO NOT
use it if
it is damaged.
Servicing of a Double-Insulated Appliance
Ground Fault Circuit Interrupter Protection:
This pressure washer is provided with a ground-fault
circuit-interrupter (GFCI) built into the plugs of the
power-supply cord. This device provides additional
protection from the risk of electric shock. Should
replacement of the plug or cord become necessary,
use only identical replacement parts that include GFCI
protection.
In a double-insulated product, two systems of insulation
are provided instead of grounding. Grounding means
are not provided for a double insulated product, nor
should grounding means be added to the product.
Servicing a double-insulated product requires extreme
care and knowledge of the system, and should only be
done by qualified service personnel.
Replacement parts for a double-insulated product must
be identical to the original parts.
A double-insulated product is marked with the words
“Double Insulation” or “Double Insulated”. Product may
also be marked with symbol shown here
.
92744_15ANR010 AR142S_1500PSI ENG-FR-SP.indd 5
16/12/17 下午12:36
