4
Do not place the water purifier in a place with direct sunlight. May cause deformation and
discoloration.
Replace filter cartridge according to this instruction or if flow rate reduced significantly.
Installation
Installation Phase
1.
Remove attachment nut from water purifier.
2.
Remove the aerator cap from tap and choose matching adapter.
3.
Pass the attachment nut onto the tap, place and tighten adapter over the tip of the faucet.
4.
Screw the attachment nut firmly onto the water purifier housing.
5.
Align the filter element assembly with the clamp slot and insert it into the clamp slot, then
rotate 90°.
6.
Prepare and do the flushing of product and filter, according to instructions in
“
Cautions
”
phase
of this instruction.
Choosing the right adapter
NOTE: adapter fittings are made of plastic, therefore excess tightening with tools may damage the
fitting threads. O-ring seal is placed in between adaptor and faucet connection. If it seems that
adaptor threads are not easily matching, it may be that your faucet has non-standard, threads. In this
case you can find suitable extension fittings from hardware stores or HVAC companies.
Product package includes several adapter sizes, as follows:
Types of external thread adapters
M20 (STD1,0mm), M22 (STD1,0mm) and M24 (STD1,0mm)
Types of internal thread adapters
M20 (STD1,0mm), M20 (STD1,75mm) andM22 (STD1,0mm)
Usage
Switch lever has three positions:
•
Purified water.
•
Non-purified water, as a direct flow.
•
Non-purified water, as a shower flow.
