140W
3.5Kg
4Kg
H300
282X221X375mm
~220V
300±5% ml/min
Product name
Hydrogen inhaler(single inhaler)
Product model
Rated power
Hydrogen flow
Net weight
Gross weight
Maintenance
Machine is
too hot
Water in the tank
is at low level
Water quality is abnormal
Water in the tank
is too full
Corresponding indicator will
turn red in case of failure.
Corresponding indicator will
turn white after the failure is
eliminated.
Hydrogen flow indicator
The machine timing indicator
is measured in hours.
Press "Time" after starting
up, and then select among
0.5h, 1.0h, 1.5h and 2.0h.
No time is set when the
machine is turned on as the
default time is 1 hour.
In the Start/Pause process
of hydrogen production, the
Time key is inoperative.
Flow: Hydrogen
production by machine
Available in
100/200/300
Intercyclic selection.
Power: Power on and enter standby
mode, and then the indicator turns red;
keep pressing it for 2s to turn it on, and
then the power indicator turns white;
and keep pressing it for 2s to turn it off,
and then the power indicator turns red.
Start/Pause: After the machine has set the
time and flow,
Press this button to start the machine to
produce hydrogen.During hydrogen production,
Press this button to pause hydrogen production.
Press this button to resume hydrogen production
while the machine is paused.
Water tank cover
Humidification
bottle (clear water)
1.1 Structure
The product consists of power cord, shell, circuit board, PEM pure water
electrolytic cell, water tank and so on.
1.2 Application
This product is only for home and personal use and not for other purposes
than hydrogen inhalation.
1.3 Performance indexes
Components
Hydrogen outlet
Humidification
bottle cover
Fixing clamp for
humidification bottle
Aluminum alloy
housing
Water inlet
Nasal suction
pipe outlet
Water outlet
Power line
02
01
Product Overview
Panel Buttons and Corresponding Operations
Input voltage
Product Measurement
