12 – Emptying the condensed water-tank
Cleaning the interior
If the condensed water tank at the bottom of the unit fills
with water, it must be emptied,
To do this, unscrew the tank lid with the built-in valve and
shake out the water. Make sure that the device does not get
wet. Then close the tank lid again.
The inside of the glass container and the grid-shaped
negative electrode, which produces the hydrogen, must be
cleaned with 1 teaspoon of citric acid dissolved in warm
water if traces of limescale are visible. Close the white lid
and shake vigorously for 30 seconds. Allow the citric acid
solution to act for 1 hour and rinse the electrode and the
container with its lid several times with hot water.
This cleaning is also necessary for hygienic reasons at least
every 2 weeks or if there is an unpleasant smell in the
device. In this case the water should be about 50 - 60
degrees C hot. Sometimes water can accumulate in the valve
chamber of the white pressure cover.
Keep this button pressed and shake the water out.
Citric acid
Dissolve a portion in
warm water
