11 – Producing hydrogen water
The larger the water container used, the longer the
electrolysis time should be.
The optimum time for the
standard glass container (0.3 l) for most types of water is 2 x
5 minutes.
You should not produce more than a
maximum of 20 minutes in total without opening the lid
in the meantime.
The PEM cell in this unit is designed to meet the
standard requirement of 0.5 mg/l (500 ppb) of hydrogen
water for 0.3 glass containers when in the 5 minute
mode.
With the optional H
2
blue kit drops available as an
accessory, you can test what production time you need to
set for your water to reach your target hydrogen
concentration.
Why do we recommend the
use of the small waisted
glass vessel with 0.3 litre
capacity?
•
Because this is an
amount that anyone can
drink within 10 minutes.
•
Remember: Hydrogen
gasses out quickly!
•
Do not produce large
amounts, preferably drink
small quantities
immediately.
With the on/off button you start the hydrogen
production, which you recognize from the fine bubbles
rising.
1. By
pressing the button once, the LED lights up
blue and the unit produces for 5 minutes
.
2. By
pressing the button twice, the LED will turn
green and the unit will produce for 7 minutes
.
3. As soon as the LED changes to
red
, charging the
device should be carried out before its next use.
4. To
stop
the device from producing, press the On/
Off button for 3 seconds.
