WWW.AQUAVENTRONICS.COM
© 2011 AQUAVENTRONICS
BUMP N' BLAST - OWNERS MANUAL
PAGE 4 OF 11
2.1 Water Settings
Every Beat The Bucket game has been supplied with a preprogrammed water fill
time. In most cases, the bucket should be filled to within 2-3 inches of the top.
The amount of water dumped from the bucket is adjustable, however the game
does require approximately half of the bucket to be full in order to dump. The
easiest method of adjusting the amount of water is by simply partially closing a
valve or tap connected to the water source, or using the supplied water valve on
the game.
For alternative play, such as 2 hits to dump the bucket, test with different valve
settings until you get it right.
2.2 Game Play
Beat The Bucket is meant to be played with 2 people. A single player is to stand
behind the framework, while a second player throws water-logged foam balls (or
juggle balls) at the targets. The player behind the framework can block the balls
from hitting the targets by operating the blocking lever. The player throwing the
balls should be 10-15 feet away, depending on the age and skill of the participants.
Should a target be hit, the bucket will automatically dump the water, reset to the
upright position, and refill with the predetermined amount of water. Once the
water stops filling, a target may be triggered.
DO NOT USE ANY HARD BALLS ON THE GAME!!
