WWW.AQUAVENTRONICS.COM
© 2011 AQUAVENTRONICS
BUMP N' BLAST - OWNERS MANUAL
PAGE 3 OF 11
2. OPERATION
To operate your Beat The Bucket game:
STEP 1: Find a flat surface where there is sufficient drainage.
STEP 2: Remove Pins from all 4 legs and lower into position.
STEP 3: One side at a time; raise the game slightly in the air while inserting the
pins in the lowered position.
STEP 4: Raise the bucket fill tube into position. Remove the pin or bolt and
replace once rotated into position.
STEP 5: Raise the upped framework by lifting in the center as high as possible if a
single person, then using one hand to pull the framework up, insert the
pins on one side and then do the same on the opposite side. (Easiest
method is with 2 people, lifting at the same time)
Step 6: Move the blocker arm to the center position
STEP 7: Connect the water supply to the garden hose connection
Step 8: Plug in the game battery pack
* Once the power is disconnected, the bucket will dump!! Watch Out!!
STEP 3
STEP 5
