AquaVac King Shark, Owner'S Manual

Page: 16 / 19

KingShark
KingShark
PREVENTATIVE MAINTENANCE
Congratulations on the purchase of the KingShark. The KingShark is built and
designed to give you years of service.
In order to maximize efficiency and receive long term service, we suggest the following:
1. Thoroughly rinse entire unit after use.
2. Clean filters thoroughly after each use—a clogged filter will decrease efficiency
dramatically.
3. Remove any twists in the cord after each use. Twisting should be minimal if
the unit is functioning properly.
4. Avoid allowing the unit to “cool down” in the water. For example, if used on a
timer, it is better to set for 5:00 a.m. to 8:00 a.m. (then remove) than it is to set
for 12:00 a.m. to 3:00 a.m. (and remove it at 8:00 a.m.).
5. Inspect belts and filter frequently. Replace when necessary.
6. Always keep your Sensor Bar level; (a non-level Sensor Bar will cause the cord
to twist).
PROTECT YOUR INVESTMENT!
Following these quick and easy steps will extend the life and efficiency of
your KingShark.
If you have any questions, contact your local Service Center or call us at 1-800-327-0141.