Should a second cleaning cycle be required, switch OFF the power supply for 10
seconds and restart.
7. After the pool has been cleaned, switch OFF the power supply before removing the
cleaner from the pool.
8. Remove the cleaner from the water at the shallow end of the pool by pulling the cable
until the cleaner reaches the surface.
Then lift it out of the water using the handle, NOT the cable.
9. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Caution:
When pulling the cable, reel it in hand-over-hand - do
NOT
reel it around your
arm.
DO NOT ENTER THE SWIMMING POOL WHEN THE CLEANER IS OPERATING.
Optimum operating water temperature range for the cleaner is
10C - 35C.
Remove the cleaner from the pool after each use. Keeping the cleaner permanently in the
pool may result in additional service requirements.
