background image

1

IMPORTANT SAFETY INSTRUCTIONS

This robotic swimming pool cleaner has been manufactured with the highest degree of care and 
concern for safety. We suggest the following safety precautions become part of your pool safety 
regulations: 

SAVE THESE INSTRUCTIONS

1.   ALWAYS  PUT THE  MACHINE  INTO THE  WATER  BEFORE  CONNECTINg  IT TO THE 

ELECTRICAL OUTLET.

2.   IT  IS  IMPORTANT  FOR  SWIMMERS’  SAFETY  TO  REMOVE  THE  UNIT  IMMEDIATELY 

FOLLOWINg  USE.  THIS  CAN  ALSO  IMPROVE  THE  OPERATINg  LIFE  OF  YOUR 
CLEANER.

3.   BE CERTAIN THE MACHINE IS ONLY PLUggED INTO A PROTECTED 220-240 VOLT AC 

OUTLET THAT IS PROTECTED FROM SHORT-CIRCUITS. FIT A 30 MA DIFFERENTIAL 
PROTECTION DEVICE TO PROTECT PEOPLE FROM ELECTRIC SHOCk CAUSED BY 
A POSSIBLE BREAk IN THE ELECTRICAL INSULATION.

4.  DO NOT HANDLE MACHINE WHILE IT IS PLUggED INTO THE ELECTRICAL OUTLET. 

5.   DO NOT USE AN EXTENSION CORD. THIS COULD CREATE A SAFETY HAZARD AND/OR 

DAMAgE YOUR CLEANER. 

6.  ALWAYS STAY OUT OF THE POOL WHILE CLEANER IS IN OPERATION.

7.  NEVER ALLOW PLUg TO ENTER THE POOL.

8.   DO  NOT  OPERATE THE  MACHINE  OUT  OF WATER. THIS WILL  DAMAgE THE  MOTOR 

SEAL AND VOID THE WARRANTY.

9.   DO  NOT  DRAg  THE  MACHINE  OUT  OF  THE  POOL  AgAINST  THE  SIDE  WALL.  THIS 

COULD DAMAgE UNIT AND/OR YOUR POOL WALL. 

10.   DO NOT BURY CORD. REPLACE DAMAGED CORDS.

11.   WARNING - TO REDUCE THE RISK OF INJURY, DO NOT PERMIT CHILDREN TO USE THIS 

PRODUCT UNLESS THEY ARE CLOSELY SUPERVISED AT ALL TIMES.

12.   IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, 

ITS  SERVICE  AGENT  OR  SIMILARLY  qUALIFIED  PERSONS  IN  ORDER TO  AVOID  A 
HAzARD.

While the cleaner has been made to operate as safely as possible, we suggest you exercise reason-
able care in the handling of the vacuum and inspect the electrical cord frequently for damage or 
wear, as with any other electrical appliance. After use, remove the unit and rinse with fresh water 
and remove any twists that may be present in the cord. 

Summary of Contents for fully automatic pool cleaner



















Reviews: