Aquatronica ACQ210-D, Instruction Manual

Page: 6 / 16

IsACQ210D-0 Rev. 250907-2 6 - 16
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com
The example in (Fig. 7) shows enabling of the socket
“C”: pressing the

key once, the socket is highlighted
and the symbol D appears above it.
To disable a socket, press the

key a second time;
in this case, only the symbol D will appear above the
selected socket.
The outputs on the lower line determine which devices
will be enabled/disabled when the conductivity goes
below the set minimum value (Ref. - ∆MIN); the outputs
on the lower line are set using the

key.
The example in (Fig. 7) shows disabling of the socket
“C”; only the symbol D appears.
After the desired sockets have been set, press “ Enter ”
to return to the previous menu (Ex. Fig. 6).
The “ Confirm ” field is automatically selected: by press -
ing “ Enter ” the inserted program is saved.
If different conductivity (density) values are desired
based on the time of day, these can be set graphi -
cally.
To program this function, proceed as follows:
Main screen

Main menu

Density

Programs

In-
sert.
• Using the

keys, select the conductivity reference
parameter ( Ref. ). Using the

keys, select “ Curve ”
(Ex. Fig. 8). Afterwards move to the /\/\/\/\ symbol
and press “ Enter ”.
A screen opens where the desired conductivity value can
be graphically modeled over 24 hours (Ex. Fig. 9).
• Using the

keys, select the time of day (in 2-hour
intervals, lower left corner). Using the

keys, modify
the conductivity value (lower right corner) for the se -
lected time. When finished, press the “ Enter ” key.
(Fig. 7)
Top-off
PU01 A B C D E F G H
PU01 A B C D E F G H
D
D
English
(Fig. 8)
Programs
Curve /\/\/\/\
∆ MIN: ∆ MAX:
0.0020 0.0010
Sockets Confirm
(Fig. 9)
18:00 1.0232