11 - 16
IsACQ150-1 Rev. 00907-1
Via dell’Industria, 0 - 405 Cavriago (RE) Italy Tel.: +39 05 494403
Fax: +39 05 494410 http:\\www.aquatronica.com E-mail: [email protected]
Settings Menu
Contrast (Fig. 10)
Modifies the contrast of the display according to external
conditions to obtain optimal visibility.
To modify this parameter, proceed as follows:
Main screen
Main Menu
Settings
Display
Contrast.
•
Press key
to increase the contrast or key
to decrease
it, then press
“Enter”
to confirm.
Screen Mode (Fig. 11)
This option allows the user to turn off the display if desired
(
“Always ON”
is the programmed default).
To modify this option, proceed as follows:
Main screen
Main Menu
Settings
Display
Screen
Mode.
•
Select between the two options using the keys
:
Always ON =
the display always remains on.
Stand-by =
the display turns off automatically after a pe-
riod
of about 3 minutes from the last action.
When finished, press
“Enter”
.
Reset Settings (Fig. 1)
This option resets the control unit, returning it to the initial
configuration (see paragraph
“When turning ON”
).
To utilize this function, proceed as follows:
Main screen
Main Menu
Settings
Reset Settings.
•
Press
“Enter”
to confirm or
“Esc”
to cancel the operation
when the message appears.
About (Fig. 13)
This option displays the Hardware and Firmware version of
the control unit.
To utilize this function, proceed as follows:
Main screen
Main Menu
Settings
About.
(Fig. 11)
Screen Mode
Always ON
Stand-by
(Fig. 1)
Would you like to
reset all settings?
Enter: Confirm
Esc: Cancel
(Fig. 13)
Aquatronica
FW version: x.y
Press any key to
continue
(Fig. 10)
Contrast
