10 - 16
IsACQ150-1 Rev. 00907-1
Via dell’Industria, 0 - 405 Cavriago (RE) Italy Tel.: +39 05 494403
Fax: +39 05 494410 http:\\www.aquatronica.com E-mail: [email protected]
Settings Menu
Sensors (Fig. 5)
This menu is displayed only when 3 or 4 devices are connected
(Interfaces ACQ210N-TL and ACQ210N-WL each allow 2 sen
-
sors to be connected).
To select this function, proceed as follows:
Main Screen
Main Menu
Settings
Sensor.
When this menu is entered (see Fig. 6), the user can select
the desired sensors and display their values on the Main
Screen.
Note. Up to sensors can be selected. When this limit
is reached, an error screen (see Fig. 7) will appear if
“Enter” is pressed.
Display (Fig. 8)
This option is used to personalize the aspects of the display,
such as the Brightness, Contrast, Screen Mode, and the
Scrolling Time.
To select this option, proceed as follows:
Main screen
Main Menu
Settings
Display.
Brightness (Fig. 9)
This modifies the display’s brightness according to external
conditions to obtain optimal visibility.
To modify this parameter, proceed as follows:
Main screen
Main Menu
Settings
Display
Bright-
ness.
•
Press key
to increase the brightness or key
to decrease
it, then press
“Enter”
.
(Fig. 8)
Display
Brightness
Contrast
Screen Mode
Scrolling Time
(Fig. 9)
Brightness
(Fig. 5)
Settings
Language
Date/Time
Graphic Period
Sensors
Display
(Fig.6)
Level
Water Leak 1
Temperature
Sensors
Water Leak
(Fig. 7)
Memory finished
Press any key to
continue
