Operating the pool cleaner - Plugging the cable
4
A
B
slot
key
C
D
Plugs Type I
To plug the cable
(Fig A) into the socket on the power supply (Fig
.
B), please do the
following:
1.
Prepare the plug as seen in (Fig. C) with the key and 3 outside slots
exactly as shown.
2.
Fit exactly the key and the slots from cable plug with the corresponding key and slots
from the power supply socket. (Fig. D)
3.
Push the plug into the socket of the power supply all the way in.
4.
Once the plug is in, rotate the plug to the right to lock it into place
(Fig. E).
5.
To remove the plug, first rotate the plug to the left to unlock it, then pull it out (Fig. F).
Socket (B)
Cable plug (A)
slot
key
Push and rotate
right to lock
E
Rotate left and
pull to unlock
F
A
B
riser
key
cable
plug
C
D
Plugs Type II
To plug the cable
(Fig A) into the socket on the power supply (Fig
.
B), please do the
following:
1.
Prepare the plug as seen in (Fig. C) with the key and the riser
exactly as shown.
2.
The riser should face up
(Fig. E) in order to keep the socket cap open. The cap will lock
the cable in place.
3.
Fit exactly the key with the corresponding key slot from the power supply socket.
Although the socket has 4 holes, only the top and the bottom one will be used (Fig. D)
4.
Push the plug into the socket of the power supply all the way in.
power supply
socket
cable
plug
Socket (B)
Cable plug (A)
power supply
socket
key
E
cap
THIS
SIDE UP
cable
plug
power supply
socket
cable
plug
power supply
socket
