4.3
Main display
In the standard display, the control shows the switching status of the plant and the motors, e.g.:
1. line: Date and time
2. line: Current SBR cycle
2. line (right): Normal or eco-mode operation of plant, (remaining)
time that the current phase has left
3. line: Display of which motor is running or “motors off”, if all the
motors are turned off
4. line: Operating current of the motors
5. line: Error display
6. line: Floater status up or down
If the key is pressed, the following appears:
- Version
- Date of version
- Type (set PT)
- Effluent class
The key can also be used to turn off the buzzer in this menu
(see also 5.4.6)
8
4.2
Commissioning
When commissioning the unit, the following information must be entered first:
- Password
- Language (see menu item 5.4.4)
- Date and time (see menu item 5.4.1)
- Plant size (see menu item 5.3.3)
- Denitrification (see menu item 5.5.2)
- PO -elimination (only for type K-Pilot 8.4, see menu item 5.3.4)
3
- Test mode - lasts approx. 1 minute (see menu item 5.3.1)
Following the test mode, a window appears with the prompt input ok?. This can be answered with
YES / NO. If the input is NO, you start again by entering the password, if YES, the standard
display is shown.
The commissioning engineer must ensure that the parameters are set in such a
way that they comply with any requirements from the construction approval for
the plant on which the control is intended to be employed.
4 Function
