6
w w w . a q u a t i c l i f e . c o m
INSTALLING THE CARTRIDGES
Each TI Cartridge uses a triple gasket seal to prevent
water leaks. The cartridges are easily installed into the
TI Module Heads by inserting the cartridge into the head
and twisting to the right.
The TI Module Heads are equipped with a valve that
automatically turns off the water supply to each filter
cartridge when you remove the cartridge. To make the
removal of the filter cartridges easier, the heads and
cartridges can be tilted up as shown below.
IMPORTANT!
Flush Carbon cartridge prior to use.
Remove: Twist left
Install: Twist right
NOTE:
It is important to install the cartridges in
the correct order. Match the cartridge label/color
to the labels that are affixed to the TI Module
Heads. Failure to do so will result in loss of filter
performance and can shorten the lifespan of
the filter.
UNIT MAINTENANCE
6-Month Maintenance
TI Sediment Filter Cartridge (Item # 330377)
TI Carbon Block Cartridge (Item # 330379)
MAINTENANCE REMINDERS
The Aquatic Life TI Cartridges include a place
where you can write the date of installation to
make it easy to know when a cartridge needs
to be replaced.
NOTE:
The life span of the filter cartridges is
dependent on multiple factors. These include
the quality of the incoming water supply as
well as the amount of use. Our recommended
replacement intervals are based on average
usage.
NOTE:
Return new cartridge to down
position after installation.
PREPARING CARTRIDGES FOR USE
The Carbon cartridge may contain carbon dust that must
be flushed out prior to use.
After installing the Filtration Unit, run water
through the Faucet until it becomes clear.
The water is now ready to use.
Model: 540372
Twist-In 2-Stage Water Filtration Unit
Installation, Operation & Maintenance Guide
