6
dual-laMP t5 ho
inStallation
2) Slide the metal anchors into the channel
located on the side of the light fixture.
place two anchors per channel; two for the
front and two for the back.
3) place a Mount over the metal anchor and
insert a screw through the Mount and
into the anchor. Tighten the screw until
the anchor pulls against the inside of the
channel and secures the Mount to the
fixture. Repeat for each Mount.
4) Reattach the Metal Attachment.
5) Slide the Acrylic Lens Cover back into the track.
6) Reattach the End plate.
G
H
I
J
Correct Placement
Incorrect Placement
K
NOTE:
There are two styles of legs
included with the fixture. position the
Mounts so that the legs extend beyond
the fixture.
sUsPension system
(Optional Accessory, Item # 420147 )
PoWer
The Aquatic Life Dual Lamp Fixture can be hung from overhead supports with the optional suspen-
sion hardware. The fixture is equipped with Mounting points on the housing for easy connection.
Refer to the Installation Guide included with the suspension hardware.
The Aquatic Life Dual Lamp Fixture is equipped with a single power cord. Connect the power cord
into a grounded outlet (GFCI). Rock the switch to turn on the light fixture. (Multiple power cords
are equipped when connecting multiple fixtures together. Refer to the Multiple Fixture installation
guide).
1) with the End plate still off, remove the
Metal Attachment by removing the four
screws with a philips Screwdriver.
aqUariUm Frame moUnts
E
F
