Aquatic
11
Serenity DriftBath Owner's Manual & Installation Guide
PLEASE NOTE:
No servicing of this product should be done by the user. There are no user serviceable parts. All controls are located
in the control recesses on the lip of the tub. These are the only controls that should be used by the consumer. Do not
change or alter any of these controls under any circumstances.
Motors are self-lubricating -- No lubrication required.
This equipment generates and uses radio frequency energy and if not installed and used properly, that
is, in strict accordance with the manufacturers instruction, may cause interference to radio and television
reception. It has been type tested and found to comply with the limits for a class B computing device
in accordance with the specifications in subpart J of part 15 of the FCC rules, which are designed to
provide reasonable protection against such interference in a residential installation. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference, which can be determined by turning the equipment on and off, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient the receiving antenna
• Relocate the receiver with respect to the bath tub.
• Move the receiver away from the bath.
• Plug the receiver into a different outlet so that the receiver and bath are on different branch circuits.
• If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions.
• The user may find the following booklet prepared by the Federal Communications Commission
helpful: “How To Identify and Resolve Radio-TV Interference Problems.”
This booklet is available from the U.S. Government Printing Office, Washington, DC 20402,
Stock No. 004-000-00345-4.
DRIFTBATH USER INFORMATION
FCC CONSUMER INFORMATION
