manualshive.com logo in svg

Aquatic LuxeAir Series, Owner'S Manual & Installation Manual

Share
Download
Aquatic LuxeAir Series Owner'S Manual & Installation Manual Download Page 4

4 Aquatic

LuxeAir Series Owner's Manual & Installation Guide

NOTE: 

The installation and service of your whirlpool should be 

performed ONLY by a qualified electrician and plumber.

You have chosen one of the finest bath products in the world! Aquatic supports your purchase with strong 

commitments to quality and customer satisfaction. 

Please read and follow all of the instructions contained in this Owner’s Manual before installing, operating or 

maintaining your whirlpool. In addition, you should continually refer to these instructions during the life of your 

whirlpool. Failure to comply with these instructions may invalidate your warranty. If you have any questions 
concerning installation, operation, maintenance or any other aspect of your whirlpool, please contact:

AQUATIC CUSTOMER SERVICE CENTER: 800.945-2726

(The Troubleshooting Guide on page 26 may be helpful in answering some of your questions.)

 

CONGRATULATIONS!

IMPORTANT!

This product 

MUST BE WATER-TESTED

 and inspected prior to installation 

or warranty will be voided. See pre-installation procedures on page 6 for instructions.

PLEASE CHECK ENTIRE UNIT FOR ANY DAMAGE.

 

If it appears damaged, contact your Aquatic Distributor immediately.

Aquatic warranty does not cover damage that occurs in transit.

Summary of Contents for LuxeAir Series

































Reviews:

No comments

Brands by name

Popular brands

Load more brands