1.2.1 Connections (see Diagram 1.2)
1. 12-pin Watertight Harness*
The 12-pin harness supplies power and ground connections to the Digital Media Locker
and four (4) speaker channel output connections from the Digital Media Locker (see Wiring
Diagram 1.3.1 on page 5).
Do not cut or modify the 12-pin harness on the Digital Media Locker™ side or warranty will be void.
2. FM/AM Radio Antenna Jack
Allows connection of FM/AM radio antenna. For best FM/AM performance make sure the
antenna is extended to the highest achievable position.
3. Auxiliary Outputs - Rear
Allows external amplifiers to be connected to power additional speakers.
4. Auxiliary Outputs - Front
Allows external amplifiers to be connected to power additional speakers.
5. Auxiliary Inputs
Allows an additional RCA input, from a standalone unit or another stereo source.
6. 12V DC External Trigger (x2)
Allows for external lighting or relays to be triggered (3A max load).
7. Wired Remote 8-pin DIN Cable
Allows connection of the wired Remote Control (AQ-WR-6F sold separately).
8. Bluetooth
Halo Aerial Technology
Connector
Connect the Bluetooth
Halo Aerial Technology
Antenna (AQ-BTANT-1) to the male SMA
connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m). Use
hands to tighten the connection (do not use a wrench).
9. Internal Dock Light Wire
Allows the Internal Dock Light to be powered from either 12V DC External Trigger wires. See
section 5.4 for further details.
10. Power Attenuation Wires
Allows the output level to be adjusted from a factory preset of -3dB to either 0dB, +3dB or
+6dB. See section 1.6 for further details.
Aquatic AV does not recommend the wired Remote Control AQ-WR-6F for use in spa applications.
*Retail packaged models only.
Getting Started
Digital Media Locker AQ-DM-6UBT
4
www.aquaticav.com
