4.1 Enter FM Radio Mode
1. Press (MODE) on remote control to switch to FM radio mode.
If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote LCD.
FM radio is only available when you are in the FM Radio mode.
4.2 Scan or Seek FM Radio Channels
1. Press (FAST REWIND) or (FAST FORWARD) to seek another station.
2. Press and hold either (FAST REWIND) or (FAST FORWARD) for manual tuning back
or forward.
4.3 Saving Radio Channel to Memory
To save the current frequency into memory, press and hold , or for more than 2 sec-
onds. The station will be stored into relevant button.
4.6 Adjust Volume Level
1. Press (VOLUME UP) once to increase the volume.
2. Press (VOLUME DOWN) once to reduce the volume.
3. Press and hold either or and the Digital Media Locker will increase or decrease
audio volume continuously.
After using Seek mode the unit will automatically switch back into Scan mode after 20 seconds.
4.5 Switch between US and European FM Modes
1. Make sure dock and remote are turned on and in ‘RADIO’ mode.
2. Press the AUDIO button 6 time in a row.
3. The remote will display ‘AREA USA’ or ‘AREA EUR’ depending on which tuning mode is
currently selected.
4. Use the and buttons to switch between US or European modes.
5. Press (PLAY/PAUSE) to select the desired tuning mode.
6. Once you switch modes it will default to the FM station stored in ‘PRESET’.
US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5, 88.6,88.7 MHz. EUR mode will
increase and decrease the FM frequency in steps of 0.05 MHz, e.g. 88.25, 88.30, 88.35 MHz.
When in Seek mode and European FM tuning mode, all frequency steps will be visible.
4.4 Listening to Saved Radio Memory
Press the , or preset button once to listen to the station stored in that button.
Listening to FM Radio
Digital Media Locker AQ-DM-5UBT
11
www.aquaticav.com
