MASK DPI
Masked only the AF which has different PI.
MASK ALL
Masked the AF which has different PI and NO RDS signal with high field strength. hear the
wrong sound in whole
5) EON TA
EON TA LOCAL is the default setting. User now has 5 seconds to select EON TA LOCAL to
EON TA DISTANCE by pressing the /-.
EON TA LOCAL
When the filed strength level of EON linked is less than threshold level, the radio does not
switch that station, and a customer can hardly listen to any disturbances.
When EON TA LOCAL mode is selected, “EON TA LO” on numeric
display is indicated for a few seconds.
EON TA DISTANCE
EON TA switch is tried to implemented by the information of current station.
When EON TA DISTANCE mode is selected, “EON TA DX” on numeric display is indicated
for a few seconds.
The RDS data used are the PI, PS, AF, TP, TA, EON and PTY data.
6) TA VOL
TA VOL 10 is the default setting. User now has 5 seconds to change it from 0-50 by press-
ing the /- buttons.
7) REGION
REGION OFF is the default setting. User now has 5 seconds to select REGION OFF to
REGION ON by press the /- buttons.
Some broadcasting stations change their program from normal broadcasting to regional
broadcasting for a certain time period. When in REGION ON mode the current listening pro-
gram remains unchanged. When in REGION OFF mode it allows the reception moves to
the regional station.
15
www.aquaticav.com
SETTINGS OPERATION - RDS MENU
RDS - EON TA
RDS - TA VOL
RDS - REGION
TUNER OPERATION
FM BAND OPERATION
TUNING UP / DOWN
USING & STORING PRESET STATIONS
STEREO / MONO TUNER OPERATION
18
www.aquaticav.com
A
Q
-C
D
-4
Press BAND to change between FM bands and AM (MW) bands. The reception band
will change in the following order:
FM1--FM2--FM3--AM1(MW1) --AM2(MW2)
MANUAL TUNING
Press and hold the TUNING up or TUNING down button for more than 3 seconds to
active the manual tuning mode. The radio frequency will tune up or down rapidly and will
stop when you released the button. If buttons have not been pressed for 5 seconds, it will
return to Auto Seek tuning mode
AUTO SEEK TUNING
Short press the TUNING up or down buttons to seek the next station automatically.
Six numbered buttons store and recall stations for each band
AUTO STORE (AS)
Select a band (if needed). Press and hold AS/PS button for 3 seconds. It will select 6
strong stations and store them in the current band automatically.
PRESET SCAN (PS)
Scan stations stored in the current band. Select a band (if needed). Short press AS/PS
button. The unit will scan and listen to each preset station for 5 seconds.
Press AS/PS button again to stop scanning when the desired station is found.
STEREO
The unit will automatically pick up a stereo signal when available. When in stereo mode, the
“ST” icon appears on the LCD. When no stereo signal is available the unit will automatically
revert to mono operation and “ST” icon will not be displayed.
MONO
When you select the MONO mode the unit will output MONO a signal.
Select MONO mode to reduce noise if the radio signal is weak.
AQCD4 Manual_V5:Layout 1 12/07/2012 13:05 Page 29
AQ-CD-4B
