C
HAPTER
1:
M
OUNTING THE
S
OLAR
C
OLLECTORS
Step Five: Install Outlet Header Bracket with Hose
Position the collector on the roof so that the center of the outlet connection hoses are directly beneath the secured
outlet header brackets. Open the clamp that is part of the outlet header bracket, insert connection hose and
LIGHTLY TIGHTEN
the clamp around the hose. Loosely place another clamp over the open end of the hose
before installing the next collector in the array. Refer to
Figure 5
. Continue to install all the collectors in the array,
coupling them side to side.
**
If the
Aluminum Header Clamp Assembly
, Part #10117-1 for 1 1/2”; #10117-2 for 2”, or
Outlet Header Clamp
Assembly
, Part #10121 is to be used for supplemental mounting hardware, install them over the outlet header at
this time.
8
F
IGURE
5
Installed Outlet Header Bracket with Hose
