Thank you for purchasing a quality AQUAPRO product!
DESCRIPtIon AnD FEAtURES
Your AQUAPRO sump pump has been
manufactured with advanced technology to provide
you with the best quality pump for extracting dirty
water from ponds, tanks and drains.
This product is not suitable for use with drinking
(potable) water and is not continuous rated.
An automatic float switch turns the pump on and off
as water levels rise and fall.
The pump has a convenient carry handle for
easy positioning.
InStALLAtIon
1. Screw the 90° elbow connector into the pump
housing in a clockwise direction. Tighten the
elbow firmly to prevent leakage.
2. Prepare the Multiple Hosetail Outlet;
it is designed to fit various hoses, pipes
and fittings. Three options (A, B & C) are
detailed below.
A. To fit a 25mm (1”) tap adaptor (temporary
application only) Cut off the first 25mm
barbed section with a hacksaw directly in
front of the threaded section. It is now
ready to be fitted with a 25mm (1”) tap
adaptor (not included).
B. To fit a 25mm hose.
No cutting is required; hose or tube is
now ready to be fitted.
C. To fit a 32mm hose.
Cut off the 25mm barbed and threaded
sections with a hacksaw leaving the
32mm barbed section only; hose or tube
is now ready to be fitted.
3. Screw the prepared Multiple Hosetail Outlet
clockwise onto the elbow, tightening firmly to
prevent leakage. Tubing or hose not to be
connected at this stage.
4. Fit hose or tube to the prepared Multiple
Hosetail Outlet and secure with hose clamp
(not supplied).
5. Unwrap the power cable and ensure the plug
is clear of wet damp locations.
6. If required the pump can be immersed in
deep water by using a rope secured to the
carry handle.
7. Adjusting the Float Switch. The float switch
allows you to adjust the switching On and Off
depending on the application requirements.
The float switch can also be set to run
continuously.
A. Automatic Mode
In automatic mode float heights can be
adjusted between 500 and 150mm. To
control the automatic on/off switching at
various water levels, simply reduce or
increase the length of the float switch
cable by inserting the cable into the
circular groove (Float Switch Adjuster) on
the side of the carry handle.
AS10000DF
VOLTS (V)
240
POWER (W)
550
MAXIMUM FLOW (L/H)
10000
MAXIMUM HEAD HEIGHT (m)
7.0
MAXIMUM IMMERSION DEPTH (m)
7.0
MAXIMUM SOFT SOLID PARTICAL SIZE (mm)
35
OUTLET Ø (mm)
25|32
CABLE LENGTH (m)
10
