Congratulations on your purchase of this great
addition to your pond or water feature. Please
check the list of parts to see that you have
everything that should come in the kit.
DESCRIPTION AND FEATURES
Your Aquapro 10W pond light has been
manufactured with advanced technology to
provide you with the best quality lighting
accessory for your pond.
The Aquapro 10W light has a glass lens
•
and is suitable for use in or out of water.
The light comes with 4 different colour
•
dichroic lenses to create different
coloured light.
The transformer converts the power
•
supply to a safe 12volt for peace of
mind in your garden.
INSTALLATION
If required, have a qualified electrician
1.
install weather proof power point near
to the pond, (within 5 meters so the
light cable will reach the transformer.
Mount the transformer in a dry and
2.
protected location making sure
that it cant be wet by either rain or
reticulation.
Connect the light to either the weighted
3.
base or the garden spike and place in
desired location. If using in water attach
the weighted base and if using in the
garden attach the spike. Place the light
in desired location taking care not to
wet the plug to attach to the transformer.
Adjust the light until facing in the
4.
general direction of the feature you
wish to illuminate. Final adjustments
should be carried out at night.
Connect the light lead to the
5.
transformer and turn on the power to
the transformer.
MAINTENANCE
Replacing the bulb/lamp;
Disconnect the power cord from the
1.
power supply.
Wait 1 or 2 minutes for the unit to cool
2.
down before touching the unit.
Dry off completely before unscrewing
3.
the front retaining ring in an anti
clockwise direction.
Once removed you will be able to
4.
gently pry off the glass lens. Take care
not to damage the silicone o’ring.
Gently remove the globe by using your
5.
fingers or if this is not possible use a
flat screwdriver to gently lever out the
globe by the edges. It will unplug from
the small fitting inside the light.
When handling new globes that are to
6.
be put back into service, it is vital that
they only be handled with tissue paper
or similar as oil and other contaminants
from your fingers will cause the globe
to fail.
Re assemble in the reverse order of the
7.
above, taking care to ensure that the
o’ ring is seated properly in its original
location.
Make sure that the retaining ring
8.
is screwed back into the light unit
securely, don’t over tighten.
Replace in desired position and turn
9.
on.
The lens on the light should be cleaned
regularly to ensure maximum efficiency.
10W
VOLTAGE (V)
240
POWER (WATTS)
10
CABLE LENGTH (M)
5
COLOUR LENS
4
SUBMERSIBLE POND LIGHT
1. Locking ring
2. Light body
3. Clear lens cover
4. 10W globe
5. 5m cable
6. Transformer
7. Colour lens set
1 2 3 4 5
6 7
