www.praherplastics.com
8
Put in the mounting bracket of the battery and tight it with the screw
(tightening torque 0,3Nm)
Connect the accumulator with the circuit board
SafetyPack
.
Put the cover onto the
Aquastar
and fix it with the 6 screws.
Connect the Aquastar to the power supply.
The green LED of the
SafetyPack
indicates that the accumulator is ready for
operation (if not please read problem detection under
9.1 LED-display)
.
Valve is now ready for use.
Further information regarding operation mode of
SafetyPack
please read chapter 9 operation
mode
Aquastar
SafetyPack
.
Circuit board Aquastar SafetyPack
11
(1) Terminal for accumulator
(2) Interface for circuit board of the
Aquastar
Comfort
(3) LEDs
(4) Screws
(5) Switch ON / OFF for accumulator
Disable
SafetyPack
(Disconnect the accumulator)
1
5
3
4
4
2
